• Matlab Bluetooth Examples
• Matlab Serial Port

Before I connected the board using bluetooth. I had to load some code on to the arduino board.
The easiest way to do this is to open the arduino enviroment software program and connect the board to a computer using usb.
then go to the tools tab and make sure the correct arduino board and usb ports are selected.
then up load this code on to the board.
this code will allow you to switch on and off the led by pressing 1 for on and 0 for off.
from your terminal.
/*
simple LED test
*/
char val; // variable to receive data from the serial port
int ledpin = 2; // LED connected to pin 2 (on-board LED)
void setup()
{
pinMode(ledpin = 13, OUTPUT); // pin 13 (on-board LED) as OUTPUT
Serial.begin(115200); // start serial communication at 115200bps
}
void loop() {
if( Serial.available() ) // if data is available to read
{;}
val = Serial.read(); // read it and store it in 'val'
if( val '0' ) // if '0' was received led 13 is switched off
{
digitalWrite(ledpin, LOW); // turn Off pin 13 off
delay(1000); // waits for a second
Serial.println('13 off');
}
if( val '1' ) // if '1' was received led 13 on
{
digitalWrite(ledpin = 13, HIGH); // turn ON pin 13 on
delay(1000); // waits for a second
Serial.println('13 on');
}
}

Matlab Bluetooth Examples

Matlab Serial Port

B = Bluetooth(RemoteName,Channel) creates a Bluetooth ® object associated with the RemoteName and Channel. RemoteName is a friendly way to identify the RemoteID.If not specified, the default channel is 0. The Instrument Control Toolbox™ Bluetooth interface lets you connect to devices over the Bluetooth interface, and to transmit and receive ASCII and binary data. Nov 25, 2016  How to connect to the bluetooth Serial Port? Asked by OhMyGod. OhMyGod (view profile) 1 question asked; 0 answers. This may be because you're not closing the serial connection after using it. After you open a serial connection and read from it, you need to close it before you can open and read from it again. Discover what MATLAB. Linux users should use the bluez Bluetooth stack. The serial port will then be called. Serial Communications. Other boards, such as the Mini, Pro, Pro Mini, Boarduino. BlueConsole is a Bluetooth Serial Adapter that provides true. NXT brick using serial bluetooth connection. Arduino I/O-Matlab basic tutorial by rmagtibay in arduino.